Monthly Archive: March 2007

Repopulating the playfield took a lot of time, mainly because I cleaned each piece as I was putting it back on. I replaced all the ramps except Insanity Falls, and I learned a couple...

With the playfield cleaned up, I turned my attention to the cabinet. I had used a PMS color sample book and PMS 293 C matches for the decals and PMS 294 C for the...

Now that the Upper PF is done, attention turns to the Main PF. Each section gets all the pieces, bolts, posts and screws removed and placed in ziploc bags, leaving me with about 89...

While I’m waiting for my parts, there is plenty to keep me busy. First thing that comes off is the Upper Playfield, so I started there. Getting that off was a bugger, but it...

Here’s the list of what’s getting replaced or added. The parts are coming from the usual places, Marco, BAA, Illinois PinBall, Pinball Inc, Pinball Life. And I’d like to send a shout out to...

The first thing to do was take stock the actual condition of the machine. It’s fully functional, so I’m good there. All the dirt hides a lot, however, and closer examination of all the...

I picked up a White Water from a local op here in SLC. It’s my first pin, and I’m going to jump in with both feet and restore it to the best of my...