Heatsinks for BR1 and BR2 on WPC games

From: “PT” <>
Newsgroups: rec.games.pinball
Subject: Re: Heatsinks for BR1 and BR2 on WPC games

Have you tried PBR? The part number is 01-10572 (I think). Its a
tough size to find. The tall caps to the side keep you from using a
larger sink and you don’t want a smaller sink. I looked around a few
years ago to try to find a bigger, better heat sink and could not find
one for a reasonable price.

You could always get a big old sink from an dead stereo or something,
cut it to size and tap for screw. Make sure the fins align vertically.

Good luck, let us know if you find something good. Whatever you find,
be sure to use heat sink compound…

John