BSD Repair, Part 1
The op who sold me the BSD had a thing. A thing with snipping any wire they could. I’ve counted at least 4 snipped wires on these games so far. Cayle George was willing to help me find a part. Here’s so info if anyone else would like it.
From what I can see, the cables you are referring to go up to the top of the playfield and power the small coil that opens and closes the left gate for the “mist” multiball. This gate is located under the large left playfield houses plastic.
These pictures I took for you should help make things clear:
(The first picture is large, may take a few seconds to load)
http://www.caylegeorge.com/pinball/bsd1.jpg
http://www.caylegeorge.com/pinball/bsd2.jpg
http://www.caylegeorge.com/pinball/bsd3.jpg
http://www.caylegeorge.com/pinball/bsd4.jpg
http://www.caylegeorge.com/pinball/bsd5.jpgOn the way to the top of the playfield, the cable goes thru the hole on the left side of the playfield next to the “castle popper” bracket as shown in the picture.
Hope this helps, if not, give me more details about your problem. :)
Have a great night,
