Heatsinks for BR1 and BR2 on WPC games

by Chris — published on August 20th, 2005

From: “PT” <>
Newsgroups: rec.games.pinball
Subject: Re: Heatsinks for BR1 and BR2 on WPC games

Have you tried PBR? The part number is 01-10572 (I think). Its a
tough size to find. The tall caps to the side keep you from using a
larger sink and you don’t want a smaller sink. I looked around a few
years ago to try to find a bigger, better heat sink and could not find
one for a reasonable price.

You could always get a big old sink from an dead stereo or something,
cut it to size and tap for screw. Make sure the fins align vertically.

Good luck, let us know if you find something good. Whatever you find,
be sure to use heat sink compound…

John

This entry was posted on Saturday, August 20th, 2005 at 9:40 pm and is filed under Restoration. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site. .

No Responses to “Heatsinks for BR1 and BR2 on WPC games”

You can subscribe to the RSS feed for comments on this post. You can also reply to this post directly in your weblog, and take advantage of the TrackBack URI to record your reply in this post.

  1. No comments posted yet

Leave a comment

Line and paragraph breaks automatic, e-mail address never displayed, HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>