Removing wires from a Playfield

by Chris — published on July 1st, 2005

From: “Cliffy” <>
Newsgroups: rec.games.pinball
Subject: Re: how to - remove wire guides from playfield?

I use rail nippers, otherwise known as flush cut end nippers. They work
especially well on the snubbers that are down to the wood. Do your
clearing BEFORE you put in the wire guides. If they have loose holes
dab a little elmers in the hole first.

Cliffy
A passion forpinball!
www.passionforpinball.com

This entry was posted on Friday, July 1st, 2005 at 12:39 pm and is filed under Restoration. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site. .

No Responses to “Removing wires from a Playfield”

You can subscribe to the RSS feed for comments on this post. You can also reply to this post directly in your weblog, and take advantage of the TrackBack URI to record your reply in this post.

  1. No comments posted yet

Leave a comment

Line and paragraph breaks automatic, e-mail address never displayed, HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>